Hi-Vis Hanging pocket Vest

Standards and labels

• EN ISO 20471:2013

  High-visibility clothing with the EN ISO 20471:2013 rating is tested for its ability to visually signal the wearer's presence in all light conditions, including daylight and vehicle headlights in the dark. This ensures the clothing makes you clearly visible to others, significantly reducing the risk of accidents in hazardous environments.

  Test results

  Reflective Strip Area Grade 1

  Provides the lowest level of visibility for low-risk situations. It is intended for use in off-road areas or where traffic speeds are below 30 km/h, such as in parking lots or warehouses.

• EN 11611:2015

  Protective clothing with the EN 11611:2015 rating is tested for protection against molten metal splashes, limited flame spread, radiant heat from welding, and reduced electrical shock risk. This ensures professionals in welding and allied processes are protected from common hazards, helping to minimize injuries.

  Reach out to ask about the standard test results

• EN 11612:2015

  Protective clothing, including garments, gaiters, hoods, and overboots, with the EN 11612:2015 rating are tested for protection against various heat and flame hazards like limited flame spread, convective heat, radiant heat, and splashes from molten metals. This ensures the clothing meets minimum safety standards for specific thermal risks, helping you choose gear that provides essential protection in hazardous environments.

  Reach out to ask about the standard test results

• EN 1149-5:2018

  Protective clothing with the EN 1149-5:2018 rating is tested for its ability to dissipate electrostatic charges. This prevents sparks that could ignite explosive atmospheres, keeping the wearer safe in hazardous environments.

  Reach out to ask about the standard test results

• EN 13034:2005

  Protective clothing, such as coveralls and aprons, with the EN 13034:2005 rating are tested for limited protection against light spray, liquid aerosols, or low-volume splashes of liquid chemicals. This means the clothing provides a barrier against minor chemical exposure, allowing you time to safely remove it before chemicals penetrate.

  Test results

  Liquid Chemical Protection Type 6

  Provides protection against light sprays, liquid aerosols, and low-pressure, low-volume splashes of liquid chemicals. It is intended for use in low-risk situations where a full chemical barrier is not required, such as industrial cleaning or maintenance.

• EN 61482-2

  Protective clothing with the EN 61482-2 rating is tested for protection against the thermal hazards of an electric arc, such as intense heat and flames. This means the clothing helps prevent severe burns by limiting heat transfer during an arc flash incident, enhancing user safety.

  Reach out to ask about the standard test results